EV

EV

Version:

EV

Unit coolers

The line is composed of air evaporators selected to match the corresponding model of the condensing unit for the MC line. Models for applications at average and low temperatures are available, all equipped with an electrical defrosting system.

The thermostatic valve (TE) is available as an accessory, also in this case selected to match the corresponding condensing unit.

dhhdhash as asdhj asldhas dòashd òahd adihò





Carpentry is in aluminium protected by a plastic film, suitable for applications requiring a high level of hygiene and for saline environments.

The battery is constructed with corrugated aluminium fins and copper pipes (diameter 12 mm). According to the field of application, the distance between the fins varies from 5.5 mm for MT to 10 mm for LT.

The motor fans are of the axial type at 230V-50Hz, 4 poles for the models CTE - RLE - BLE and at 3Ph-400V-50Hz, 4 poles for the models ICE.

The protection level for the motor is IP54 in compliance with DIN 40050. Integrated thermal protection by thermal switch guarantees effective protection against overheating.

In all models the fan is provided with a protective grill.

Electrical defrosting is carried out by means of electrical elements in stabilised titanium stainless steel with vulcanised terminals. The connection is for a power supply of 400 V/3/50 Hz. Their positioning and power inside the finned package guarantees ideal defrosting with low electricity consumption.

Yields are calculated according to SC2 (standard condition 2) EN 328 with air temperature = 0 °C, evaporation temperature = -8 °C, and with dry fins.

The supply does not include condensation discharge elements or sensor indicating defrosting completion.